HS-75W series single output switching power supply
Features:
·Universal AC input voltage
·Small volume,low weight,high efficiency
·Protections:short circuit/over load
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Years warranty
Features:
·Universal AC input voltage
·Small volume,low weight,high efficiency
·Protections:short circuit/over load
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Years warranty
| Model | HS-75-5 | HS-75-12 | HS-75-15 | HS-75-24 | |
| output | DC voltage | 5V | 12V | 15V | 24V |
| Voltage tolerance | ±2% | ±1% | ±1% | ±1% | |
| Rated current | 10A | 6.3A | 5A | 3.2A | |
| Current range | 0~10A | 0~6.3A | 0~5A | 0~3.2A | |
| Rated power | 50W | 75.6W | 75W | 76.8W | |
| Ripple&noise | 80mvp-p | 120mvp-p | 120mvp-p | 120mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | ±10% | |
| input | Voltage range | 90~132VAC/170~264VAC(selected by switch),235~373VDC | |||
| frequency | 47~63HZ | ||||
| AC current | 1.8A/115VAC,0.9A/230VAC | ||||
| efficiency | 80% | 82% | 82% | 84% | |
| Inrush current | Cold start current18A/115VAC,36A/230VAC | ||||
| Leakage current | < 1mA/240VAC | ||||
| protection | overload | Rated output power105%~135% start over load protection | |||
| protection type:hiccup mode,auto-recovery after fault condition is removed | |||||
| ----- | ----- | ||||
| ----- | |||||
| environment | Working temp,humidity | -10ºC~+60ºC,20%~90%RH | |||
| Storage temp,humidity | -20ºC~+85ºC,10%~95%RH non-condensing | ||||
| Withstand vibration | 10~500HZ,2G10min/1cycle,period for 60 minutes,each axes | ||||
| safety | Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||
| Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC | ||||
| Fit standard | Safety standard | Compliance to UL1012 | |||
| EMC standard | Compliance to EN55022,CLASSA | ||||
| others | Dimension | 111*78*36mm(L*W*H) | |||
| Weight/packing | 0.3kg/50pcs/16kg/0.027 m³/0.96CUFT | ||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25ºCof ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||||